Reference Guide

Port Monitoring | 707
Related
Commands
show config
s z
Display the current monitor session configuration.
Syntax
show config
Defaults
No default values or behavior
Command Modes
MONITOR SESSION (conf-mon-sess-session-ID)
Command
History
Example
FTOS(conf-mon-sess-11)#show config
!
monitor session 11
source GigabitEthernet 10/0 destination GigabitEthernet 10/47 direction rx
show monitor session
s z
Display the monitor information of a particular session or all sessions.
Syntax
show monitor session {session-ID}
To display the monitor information for all sessions, use the show monitor session command.
Parameters
Defaults
No default values or behavior
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 32-2. Commands Example: show monitor session
FTOS#show monitor session 11
SessionID Source Destination Direction Mode
----------- -------- ------------- ------------ -------
11 Gi 10/0 Gi 10/47 rx interface
show monitor session Display the monitor session
show running-config monitor session Display the running configuration of a monitor session
S6000
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
Version 7.7.1.0 Introduced on S-Series
S6000
session-ID
(OPTIONAL) Enter a session identification number.
Range: 0 to 65535
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
Version 7.7.1.0 Introduced on S-Series