Reference Guide

PIM-Sparse Mode (PIM-SM) | 701
RP: 165.87.20.3, v2
Info source: 165.87.20.5, via bootstrap, priority 0
Uptime: 00:03:11, expires: 00:03:03
FTOS#
Example 3
Figure 30-7. show ip pim rp group-address Command Example 3
FTOS#sh ip pim rp 229.1.2.1
Group RP
229.1.2.1 165.87.20.4
FTOS#
show ip pim tib
s z
View the PIM tree information base (TIB).
Syntax
show ip pim tib [group-address [source-address]]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 30-8. show ip pim tib Command Example
FTOS#show ip pim tib
PIM Multicast Routing Table
Flags: D - Dense, S - Sparse, C - Connected, L - Local, P - Pruned,
R - RP-bit set, F - Register flag, T - SPT-bit set, J - Join SPT,
M - MSDP created entry, A - Candidate for MSDP Advertisement,
K - Ack-Pending State
Timers: Uptime/Expires
Interface state: Interface, next-Hop, State/Mode
(*, 226.1.1.1), uptime 01:29:19, expires 00:00:52, RP 10.211.2.1, flags: SCJ
Incoming interface: TenGigabitEthernet 4/23, RPF neighbor 10.211.1.2
Outgoing interface list:
TenGigabitEthernet 8/0
(*, 226.1.1.2), uptime 00:18:08, expires 00:00:52, RP 10.211.2.1, flags: SCJ
Incoming interface: TenGigabitEthernet 4/23, RPF neighbor 10.211.1.2
Outgoing interface list:
TenGigabitEthernet 8/0
(*, 226.1.1.3), uptime 00:18:08, expires 00:00:52, RP 10.211.2.1, flags: SCJ
S6000
group-address
(OPTIONAL) Enter the group address in dotted decimal format (A.B.C.D)
source-address
(OPTIONAL) Enter the source address in dotted decimal format (A.B.C.D).
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
Version
8.3.7.0
Introduced on the S4810.
Version 7.8.1.0 Introduced on S-Series