Reference Guide

700 | PIM-Sparse Mode (PIM-SM)
www.dell.com | support.dell.com
show ip pim rp
s z
View all multicast groups-to-RP mappings.
Syntax
show ip pim rp [mapping | group-address]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Example 1
Figure 30-5. show ip pim rp mapping Command Example 1
FTOS#sh ip pim rp
Group RP
224.2.197.115 165.87.20.4
224.2.217.146 165.87.20.4
224.3.3.3 165.87.20.4
225.1.2.1 165.87.20.4
225.1.2.2 165.87.20.4
229.1.2.1 165.87.20.4
229.1.2.2 165.87.20.4
FTOS#
Example 2
Figure 30-6. show ip pim rp mapping Command Example 2
FTOS#sh ip pim rp mapping
Group(s): 224.0.0.0/4
RP: 165.87.20.4, v2
Info source: 165.87.20.5, via bootstrap, priority 0
Uptime: 00:03:11, expires: 00:02:46
Uptime/expires Displays the amount of time the neighbor has been up followed by the
amount of time until the neighbor is removed from the multicast routing
table (that is, until the neighbor hold time expires).
Ver Displays the PIM version number.
• v2 = PIM version 2
DR prio/Mode Displays the Designated Router priority and the mode.
• 1 = default Designated Router priority (use ip pim dr-priority)
• DR = Designated Router
• S = source
Table 30-2. show ip pim neighbor Command Example Fields
Field Description
S6000
mapping (OPTIONAL) Enter the keyword mapping to display the multicast
groups-to-RP mapping and information on how RP is learnt.
group-address
(OPTIONAL) Enter the multicast group address mask in dotted decimal
format to view RP for a specific group.
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
Version
8.3.7.0
Introduced on the S4810.
Version 7.8.1.0 Introduced on S-Series