Reference Guide

70 | Control and Monitoring
www.dell.com | support.dell.com
Usage
If there are no fiber ports in the unit, then just the header under show inventory media will
be displayed. If there are fiber ports but no optics inserted, then the output will display “
Media not present or accessible”.
Example 1 (show
inventory for
S6000)
FTOS# -s6000#show inventory
System Type : S6000
System Mode : 1.0
Software Version : 9-0(0-566)
Unit Type Serial Number Part Number Rev Piece Part ID
Rev Svc Tag Exprs Svc Code
------------------------------------------------------------------------------
--------------------------------
* 0 S6000-01-FE-32T-AC DGTW11112941 08R4VK X00
TW-08R4VK-28298-111-2941 X00 NA NA
0 S6000-PWR-AC-R NA OR5HX X00 0600R5HX701102C3026
X00 NA NA
0 S6000-FAN-R NA 743WY X00 060743WY701102C3039
X00 NA NA
0 S6000-FAN-R NA 743WY X00 060743WY701102C3038
X00 NA NA
0 S6000-FAN-R NA 743WY X00 060743WY701102C3037
X00 NA NA
* - Management Unit
Software Protocol Configured
Example 2
(S-Series)
S50V_7.7#show inventory media ?
<0-7> Slot number
| Pipe through a command
<cr>
S50V_7.7#show inventory media
Slot Port Type Media Serial Number F10Qualified
------------------------------------------------------------------------------
0 49 Media not present or accessible
0 50 XFP 10GBASE-SR C707XS0MD Yes
0 45 Media not present or accessible
0 46 Media not present or accessible
0 47 Media not present or accessible
0 48 Media not present or accessible
0 51 Media not present or accessible
0 52 Media not present or accessible
S50V_7.7#
Example 3:
show inventory
output (Z9000)
ct-z9000-2#show inventory
System Type : Z9000
System Mode : 1.0
Software Version : 8.3.11.3b
Unit Type Serial Number Part Number Rev Piece Part ID
Ver Service Tag
------------------------------------------------------------------------------
--------------------
Version 8.3.11.1 Introduced on the Z9000.
Version 7.6.1.0 Introduced on S-Series.