Reference Guide

PIM-Sparse Mode (PIM-SM) | 699
show ip pim neighbor
s z
View PIM neighbors.
Syntax
show ip pim neighbor
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 30-4. show ip pim neighbor Command Example
FTOS#show ip pim neighbor
Neighbor Interface Uptime/Expires Ver DR
Address Prio/Mode
127.87.3.4 Gi 7/16 09:44:58/00:01:24 v2 1 / S
FTOS#
Table 30-1. show ip pim interface Command Example Fields
Field Description
Address Lists the IP addresses of the interfaces participating in PIM.
Interface List the interface type, with either slot/port information or ID (VLAN or
Port Channel), of the interfaces participating in PIM.
Ver/Mode Displays the PIM version number and mode for each interface
participating in PIM.
• v2 = PIM version 2
• S = PIM Sparse mode
Nbr Count Displays the number of PIM neighbors discovered over this interface.
Query Intvl Displays the query interval for Router Query messages on that interface
(configured with ip pim query-interval command).
DR Prio Displays the Designated Router priority value configured on the interface
(ip pim dr-priority command).
DR Displays the IP address of the Designated Router for that interface.
S6000
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
Version
8.3.7.0
Introduced on the S4810.
Version 7.8.1.0 Introduced on S-Series
Table 30-2. show ip pim neighbor Command Example Fields
Field Description
Neighbor address Displays the IP address of the PIM neighbor.
Interface List the interface type, with either slot/port information or ID (VLAN or
Port Channel), on which the PIM neighbor was found.