Reference Guide

698 | PIM-Sparse Mode (PIM-SM)
www.dell.com | support.dell.com
show ip pim bsr-router
s z
View information on the Bootstrap router.
Syntax
show ip pim bsr-router
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 30-2. show ip pim bsr-router Command Example
E600-7-rpm0#show ip pim bsr-router
PIMv2 Bootstrap information
This system is the Bootstrap Router (v2)
BSR address: 7.7.7.7 (?)
Uptime: 16:59:06, BSR Priority: 0, Hash mask length: 30
Next bootstrap message in 00:00:08
This system is a candidate BSR
Candidate BSR address: 7.7.7.7, priority: 0, hash mask length: 30
show ip pim interface
s z
View information on the interfaces with IP PIM enabled.
Syntax
show ip pim interface
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 30-3. show ip pim interface Command Example
E600-7-RPM0#show ip pim interface
Address Interface Ver/ Nbr Query DR DR
Mode Count Intvl Prio
172.21.200.254 Gi 7/9 v2/S 0 30 1 172.21.200.254
172.60.1.2 Gi 7/11 v2/S 0 30 1 172.60.1.2
192.3.1.1Gi 7/16 v2/S 1 30 1 192.3.1.1
192.4.1.1 Gi 13/5 v2/S 0 30 1 192.4.1.1
172.21.110.1 Gi 13/6 v2/S 0 30 1 172.21.110.1
172.21.203.1 Gi 13/7 v2/S 0 30 1 172.21.203.1
S6000
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
Version
8.3.7.0
Introduced on the S4810.
Version 7.8.1.0 Introduced on S-Series
S6000
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
Version
8.3.7.0
Introduced on the S4810.
Version 7.8.1.0 Introduced on S-Series