Reference Guide

694 | PIM-Sparse Mode (PIM-SM)
www.dell.com | support.dell.com
Parameters
Defaults
Defaults.
Command Modes
CONFIGURATION.
Command
History
Usage
Information
Do not enter this command before creating the access-list.
ip pim query-interval
s z
Change the frequency of PIM Router-Query messages.
Syntax
ip pim query-interval seconds
To return to the default value, enter no ip pim query-interval seconds command.
Parameters
Defaults
30 seconds
Command Modes
INTERFACE
Command
History
access-list
Enter the name of a standard access list. Maximum 139 characters.
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
Version
8.3.7.0
Introduced on the S4810.
S6000
seconds
Enter a number as the number of seconds between router query messages.
Default: 30 seconds
Range: 0 to 65535
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
Version
8.3.7.0
Introduced on the S4810.