Reference Guide

PIM-Sparse Mode (PIM-SM) | 691
Defaults
Disabled
Command Modes
EXEC Privilege
Command
History
ip pim bsr-border
s z
Define the border of PIM domain by filtering inbound and outbound PIM-BSR messages per interface.
Syntax
ip pim bsr-border
To return to the default value, enter no ip pim bsr-border.
Defaults
Disabled
Command Modes
INTERFACE
Command
History
Usage
Information
This command is applied to the subsequent PIM-BSR. Existing BSR advertisements are cleaned up by
time out. Candidate RP advertisements can be cleaned using the clear ip pim rp-mapping command.
register (OPTIONAL) Enter the keyword register to view PIM register address in
dotted decimal format (A.B.C.D).
state (OPTIONAL) Enter the keyword state to view PIM state changes.
timer [assert | hello |
joinprune | register]
(OPTIONAL) Enter the keyword
timer to view PIM timers. Enter one of the
optional parameters:
• assert: to view the assertion timer.
• hello: to view the PIM neighbor keepalive timer.
• joinprune: to view the expiry timer (join/prune timer)
• register: to view the register suppression timer.
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
Version
8.3.7.0
Introduced on the S4810.
Version 7.8.1.0 Introduced on S-Series
S6000
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
Version
8.3.7.0
Introduced on the S4810.