Reference Guide

690 | PIM-Sparse Mode (PIM-SM)
www.dell.com | support.dell.com
clear ip pim rp-mapping
s z
Used by the bootstrap router (BSR) to remove all or particular Rendezvous Point (RP) Advertisement.
Syntax
clear ip pim rp-mapping rp-address
Parameters
Command Modes
EXEC Privilege
Command
History
clear ip pim tib
s z
Clear PIM tree information from the PIM database.
Syntax
clear ip pim tib [group]
Parameters
Command Modes
EXEC Privilege
Command
History
debug ip pim
s z
View IP PIM debugging messages.
Syntax
debug ip pim [bsr | events | group | packet [in | out] | register | state | timer [assert | hello | joinprune |
register]]
To disable PIM debugging, enter no debug ip pim, or enter undebug all to disable all debugging.
Parameters
S6000
rp-address
(OPTIONAL) Enter the RP address in dotted decimal format (A.B.C.D)
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
Version
8.3.7.0
Introduced on the S4810.
S6000
group
(OPTIONAL) Enter the multicast group address in dotted decimal format (A.B.C.D)
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
Version
8.3.7.0
Introduced on the S4810.
S6000
bsr (OPTIONAL) Enter the keyword bsr to view PIM Candidate RP/BSR activities.
events (OPTIONAL) Enter the keyword events to view PIM events.
group (OPTIONAL) Enter the keyword group to view PIM messages for a specific
group.
packet [in | out] (OPTIONAL) Enter the keyword packet to view PIM packets. Enter one of the
optional parameters
• in: to view incoming packets
• out: to view outgoing packets.