Reference Guide

Control and Monitoring | 69
Example (show
environment fan)
FTOS#s6000#show environment fan
-- Fan Status --
Unit Bay TrayStatus Fan0 Speed Fan1 Speed
------------------------------------------------------------------------------
------
0 0 up up 10134 up 10031
0 1 up up 10031 up 10134
0 2 up up 10031 up 10031
Speed in RPM
* FTOS#
Example (show
environment
pem)
FTOS#s6000#show environment pem
-- Power Supplies --
Unit Bay Status Type FanStatus FanSpeed(rpm)
---------------------------------------------------------------------------
0 0 up AC up 10336
0 1 absent absent 0
* FTOS#
Example (show
environment
stack-unit)
FTOS#show environment stack-unit 0
-- Unit Environment Status --
Unit Status Temp Voltage TempStatus
---------------------------------------------------------------------------
* 0 online 35C ok 2
* Management Unit
* Management Unit
* Management Unit
show inventory (S-Series and Z-Series)
s z
Display the S-Series or Z-Series switch type, components (including media), and FTOS
version, including hardware identification numbers and configured protocols.
Syntax
show inventory [media slot]
Parameters
Defaults
No default behavior or values
Command Modes
CONFIGURATION
Command
History
S6000
media slot (OPTIONAL) Enter the keyword media followed by the stack ID of the stack
member for which you want to display pluggable media inventory.
Note: This parameter is available but not supported in 8.3.11.4. Since
stacking is not supported, if this parameter is used, the output will display
“Media not present or accessible” (see “Usage” section).
Version 9.0.2.0 Introduced on S6000.