Reference Guide

664 | Open Shortest Path First (OSPFv2)
www.dell.com | support.dell.com
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Usage
Information
If you delete all the network area commands for Area 0, the show ip ospf command output will not list
Area 0.
Example
Figure 29-5. Command Example: show ip ospf process-id
FTOS#show ip ospf 10
Routing Process ospf 10 with ID 1.1.1.1 Virtual router default-vrf
Supports only single TOS (TOS0) routes
SPF schedule delay 5 secs, Hold time between two SPFs 10 secs
Convergence Level 0
Min LSA origination 0 msec, Min LSA arrival 1000 msec
Min LSA hold time 5000 msec, Max LSA wait time 5000 msec
Number of area in this router is 1, normal 1 stub 0 nssa 0
Area BACKBONE (0)
Number of interface in this area is 1
SPF algorithm executed 205 times
Area ranges are
FTOS#
Related
Commands
process-id
Enter the OSPF Process ID to show a specific process.
If no Process ID is entered, command applies only to the first OSPF process.
vrf name
Show only the OSPF information tied to the VRF process.
Version 9.0.2.0 Introduced on S6000.
Version 8.3.11.1 Introduced on Z9000
Version 7.8.1.0 Introduced support for Multi-Process OSPF.
Version 8.3.8.0 Added output for LSA throttling timers
Version 7.9.1.0 Introduced VRF
Version 7.8.1.0
Introduced
process-id option, in support of Multi-Process OSPF.
Table 29-2. Command Output Descriptions: show ip ospf process-id
Line Beginning with Description
“Routing Process...” Displays the OSPF process ID and the IP address associated with the
process ID.
“Supports only...” Displays the number of Type of Service (TOS) rouse supported.
“SPF schedule...” Displays the delay and hold time configured for this process ID.
“Convergence Level”
“Min LSA....” Displays the intervals set for LSA transmission and acceptance.
“Number of...” Displays the number and type of areas configured for this process ID.
show ip ospf database Displays information about the OSPF routes configured.
show ip ospf interface Displays the OSPF interfaces configured.
show ip ospf neighbor Displays the OSPF neighbors configured.
summary-address Displays the OSPF virtual links configured.