Reference Guide

Control and Monitoring | 65
Command Modes
CONFIGURATION
Command
History
Usage
Information
If you do not specify parameters and enter service timestamps, it appears as service
timestamps debug uptime in the running-configuration.
Use the show running-config command to view the current options set for the service
timestamps command.
show alarms
s z
View alarms currently active in the system.
Syntax
show alarms [threshold]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
show command-tree
s z
Display the entire CLI command tree, and optionally, display the utilization count for each
commands and its options.
Syntax
show command-tree [count | no]
Parameters
Defaults
None
Command Mode
EXEC
EXEC Privilege
Version 9.0.2.0 Introduced on S6000.
Version 8.3.11.1 Introduced on the Z9000.
Version 7.6.1.0 Introduced on S-Series.
S6000
threshold Enter the keyword threshold to display the temperature thresholds in Celcuis
for each level.
Version 9.0.2.0 Introduced on S6000.
Version 8.3.11.1 Introduced on the Z9000.
Version 7.6.1.0 Introduced on S-Series.
S6000
count Display the command tree with a usage counter for each command.
no Display all of the commands that may be preceded by the keyword no, which is
the keyword used to remove a command from the running-configuration.