Reference Guide

646 | Open Shortest Path First (OSPFv2)
www.dell.com | support.dell.com
Defaults
external dist3 = 110; inter-area dist2 = 110; intra-area dist1 = 110.
Command Modes
ROUTER OSPF
Command
History
Usage
Information
T
o specify a distance for routes learned from other routing domains, use the redistribute command.
distribute-list in
z
Apply a filter to incoming routing updates from OSPF to the routing table.
Syntax
distribute-list prefix-list-name in [interface]
To delete a filter, use the no distribute-list prefix-list-name in [interface] command.
Parameters
Defaults
Not configured.
Command Modes
ROUTER OSPF
Command
History
inter-area dist2 (OPTIONAL) Enter the keyword inter-area followed by a number to specify a
distance metric for routes between areas.
Range: 1 to 255
Default: 110
intra-area dist1 (OPTIONAL) Enter the keyword intra-area followed by a number to specify a
distance metric for all routes within an area.
Range: 1 to 255
Default: 110
Version 9.0.2.0 Introduced on S6000.
Version 8.3.11.1 Introduced on Z9000
Version 7.8.1.0 Introduced support for Multi-Process OSPF.
S6000
prefix-list-name
Enter the name of a configured prefix list.
interface
(OPTIONAL) Enter one of the following keywords and slot/port or number
information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/port information.
• For Port Channel groups, enter the keyword
port-channel followed by a
number:
S-Series Range: 1-128
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
• For a VLAN, enter the keyword
vlan followed by a number from 1 to 4094.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed
by the slot/port information.
Version 9.0.2.0 Introduced on S6000.