Reference Guide

Open Shortest Path First (OSPFv2) | 639
Parameters
Defaults
Disabled
Command Modes
ROUTER OSPF
Command
History
Usage
Information
Use this command to configure all routers and access servers within a stub.
Related
Commands
area-id
Specify the stub area in dotted decimal format (A.B.C.D.) or enter a number from zero
(0) to 65535.
no-summary (OPTIONAL) Enter the keyword no-summary to prevent the ABR from sending
summary Link State Advertisements (LSAs) into the stub area.
Version 9.0.2.0 Introduced on S6000.
Version 8.3.11.1 Introduced on Z9000
Version 7.8.1.0 Introduced support for Multi-Process OSPF.
router ospf Enter the ROUTER OSPF mode to configure an OSPF instance.