Reference Guide

632 | Multicast
www.dell.com | support.dell.com
show ip mroute
s z
View the Multicast Routing Table.
Syntax
show ip mroute [static | group-address [source-address] | active [rate] | count | summary]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Example 1
Figure 28-1. show ip mroute static Command Example
FTOS#show ip mroute static
Mroute: 23.23.23.0/24, interface: Lo 2
Protocol: static, distance: 0, route-map: none, last change: 00:00:23
FTOS#
Example 2
Figure 28-2. show ip mroute Command Example
FTOS#show ip mroute
IP Multicast Routing Table
(*, 224.10.10.1), uptime 00:05:12
Incoming interface: GigabitEthernet 3/12
Outgoing interface list:
GigabitEthernet 3/13
(1.13.1.100, 224.10.10.1), uptime 00:04:03
Incoming interface: GigabitEthernet 3/4
Outgoing interface list:
GigabitEthernet 3/12
GigabitEthernet 3/13
(*, 224.20.20.1), uptime 00:05:12
Incoming interface: GigabitEthernet 3/12
Outgoing interface list:
GigabitEthernet 3/4
FTOS#
S6000
static (OPTIONAL) Enter the keyword static to view static multicast routes.
group-address
[source-address]
(OPTIONAL) Enter the multicast group-address to view only routes associated
with that group.
Enter the source-address to view routes with that group-address and
source-address.
active [rate] (OPTIONAL) Enter the keyword active to view only active multicast routes.
Enter a rate to view active routes over the specified rate.
Range: 0 to 10000000
count (OPTIONAL) Enter the keyword count to view the number of multicast routes
and packets.
summary (OPTIONAL) Enter the keyword summary to view routes in a tabular format.
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
Version
8.3.7.0
Introduced on the S4810.