Reference Guide

630 | Multicast
www.dell.com | support.dell.com
Related
Commands
ip mroute
s z
Assign a static mroute.
Syntax
ip mroute destination mask {ip-address | null 0| {{bgp| ospf} process-id | isis | rip | static}
{ip-address | tag | null 0}} [distance]
To delete a specific static mroute, use the command ip mroute destination mask {ip-address | null 0|
{{bgp| ospf} process-id | isis | rip | static} {ip-address | tag | null 0}} [distance].
To delete all mroutes matching a certain mroute, use the no ip mroute destination mask command.
Parameters
Defaults
Not configured.
Command Modes
CONFIGURATION
Command
History
show ip pim tib Show the PIM Tree Information Base.
S6000
destination
Enter the IP address in dotted decimal format of the destination device.
mask
Enter the mask in slash prefix formation ( /x ) or in dotted decimal
format.
null 0
(OPTIONAL) Enter the null followed by zero (0).
[protocol [process-id | tag]
ip-address]
(OPTIONAL) Enter one of the routing protocols:
• Enter the BGP as-number followed by the IP address in dotted
decimal format of the reverse path forwarding (RPF) neighbor.
Range:1-65535
• Enter the OSPF process identification number followed by the IP
address in dotted decimal format of the reverse path forwarding
(RPF) neighbor.
Range: 1-65535
• Enter the IS-IS alphanumeric tag string followed by the IP address
in dotted decimal format of the reverse path forwarding (RPF)
neighbor.
• Enter the RIP IP address in dotted decimal format of the reverse
path forwarding (RPF) neighbor.
static ip-address
(OPTIONAL) Enter the Static IP address in dotted decimal format of
the reverse path forwarding (RPF) neighbor.
ip-address
(OPTIONAL) Enter the IP address in dotted decimal format of the
reverse path forwarding (RPF) neighbor.
distance
(OPTIONAL) Enter a number as the distance metric assigned to the
mroute.
Range: 0 to 255
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
Version
8.3.7.0
Introduced on the S4810.