Reference Guide

622 | Multiple Spanning Tree Protocol (MSTP)
www.dell.com | support.dell.com
Command
History
Usage
Information
For two MSTP switches to be within the same MST region, the switches must share the same revision
number.
Related
Commands
show config
s z
View the current configuration for the mode. Only non-default values are shown.
Syntax
show config
Command Modes
MULTIPLE SPANNING TREE
Command
History
Example
Figure 27-3. show config Command for MULTIPLE SPANNING TREE Mode
FTOS(conf-mstp)#show config
!
protocol spanning-tree mstp
no disable
name CustomerSvc
revision 2
MSTI 10 VLAN 101-105
max-hops 5
FTOS(conf-mstp)#
show spanning-tree mst configuration
s z
View the Multiple Spanning Tree configuration.
Syntax
show spanning-tree mst configuration
Command Modes
EXEC
EXEC Privilege
Command
History
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
Version
8.3.7.0
Introduced on the S-Series.
Version 6.5.1.0 Introduced
msti Map the VLAN(s) to an MST instance
name Assign the region name to the MST region.
S6000
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
Version
8.3.7.0
Introduced on the S-Series.
S6000
Version 9.0.2.0 Introduced on the S6000.