Reference Guide

Multicast Source Discovery Protocol (MSDP) | 611
Related
Commands
ip msdp shutdown
z
Administratively shut down a configured MSDP peer.
Syntax
ip msdp shutdown {peer address}
Parameters
Defaults
Not configured
Command Modes
CONFIGURATION
Command
History
ip multicast-msdp
z
Enable MSDP.
Syntax
ip multicast-msdp
To exit MSDP, use the no ip multicast-msdp command.
Defaults
Not configured
Command Modes
CONFIGURATION
Command
History
show ip msdp
z
Display the MSDP peer status, SA cache, or peer summary.
Syntax
show ip msdp {peer peer address | sa-cache | summary}
ip msdp peer Configure the MSDP peer
clear ip msdp peer Clear the MSDP peer.
show ip msdp Display the MSDP information
S6000
peer address
Enter the peer address in a dotted decimal format (A.B.C.D.)
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
Version
8.3.7.0
Introduced on the S4810.
S6000
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
Version
8.3.7.0
Introduced on the S4810.
S6000