Reference Guide

600 | Link Layer Detection Protocol (LLDP)
www.dell.com | support.dell.com
Related
Commands
advertise med voice
s z
Configure the system to advertise a dedicated IP telephony handset or other appliances supporting
interactive voice services.
Syntax
advertise med voice {vlan-id layer2_priority DSCP_value} | {priority-tagged number}
To return to the default, use the no advertise med voice {vlan-id layer2_priority DSCP_value} |
{priority-tagged number} command.
Parameters
Defaults
unconfigured
Command Modes
CONFIGURATION (conf-lldp)
Command
History
Related
Commands
advertise med voice-signaling
s z
Configure the system to advertise when voice control packets use a separate network policy than voice
data.
Syntax
advertise med voice-signaling {vlan-id layer2_priority DSCP_value} | {priority-tagged number}
Version 8.3.11.1 Introduced on Z9000
Version
8.3.7.0
Introduced on the S-Series.
debug lldp interface Debug LLDP
show lldp neighbors Display the LLDP neighbors
show lldp neighbors Display the LLDP running configuration
S6000
vlan-id
Enter the VLAN ID.
Range: 1 to 4094
layer2_priority
Enter the Layer 2 priority.
Range: 0 to 7
DSCP_value
Enter the DSCP value.
Range: 0 to 63
priority-tagged number Enter the keyword priority-tagged followed the Layer 2 priority.
Range: 0 to 7
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
Version
8.3.7.0
Introduced on the S-Series.
debug lldp interface Debug LLDP
show lldp neighbors Display the LLDP neighbors
show running-config lldp Display the LLDP running configuration
S6000