Reference Guide

60 | Control and Monitoring
www.dell.com | support.dell.com
Command
History
Usage
Information
You cannot delete a terminal connection.
Related
Commands
motd-banner
s z
Enable a Message of the Day (MOTD) banner to appear when you log in to the system.
Syntax
motd-banner
To disable the MOTD banner, enter no motd-banner.
Defaults
Enabled on all lines.
Command Modes
LINE
Command
History
ping
s z
Test connectivity between the system and another device by sending echo requests and
waiting for replies.
Syntax
ping [host | ip-address | ipv6-address] [count {number | continuous}] [datagram-size] [timeout]
[
source (ip src-ipv4-address) | interface] [tos] [df-bit (y|n)] [validate-reply(y|n)] [outgoing-interface]
[
pattern pattern] [sweep-min-size] [sweep-max-size] [sweep-interval] [ointerface (ip
src-ipv4-address) | interface]
Parameter
Version 9.0.2.0 Introduced on S6000.
Version 8.3.11.1 Introduced on the Z9000.
Version 7.6.1.0 Introduced on S-Series.
access-class Restrict incoming connections to a particular IP address in an IP access control
list (ACL).
password Specify a password for users on terminal lines.
show memory
(S-Series)
Display the stack-unit(s) status.
S6000
Version 9.0.2.0 Introduced on S6000.
Version 8.3.11.1 Introduced on the Z9000.
Version 7.6.1.0 Introduced on S-Series.
S6000
host (OPTIONAL) Enter the host name of the devices to which you are testing
connectivity.
ip-address (OPTIONAL) Enter the IPv4 address of the device to which you are
testing connectivity. The address must be in the dotted decimal format.