Reference Guide

Link Layer Detection Protocol (LLDP) | 587
Command
History
advertise management
s z
Advertise management TLVs (Type, Length, Value).
Syntax
advertise management -tlv {system-capabilities | system-description | system-name}
To remove advertised management TLVs, use the no advertise management -tlv {system-capabilities |
system-description | system-name} command.
Parameters
Defaults
No default values or behavior
Command Modes
CONFIGURATION (conf-lldp)
Command
History
Usage
Information
All three command options — system-capabilities, system-description, and system-name} —-can be
invoked individually or together, in any sequence.
clear lldp counters
s z
Clear LLDP transmitting and receiving counters for all physical interfaces or a specific physical
interface.
Syntax
clear lldp counters interface
Parameters
Defaults
No default values or behavior
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
Version
8.3.7.0
Introduced on the S-Series.
S6000
system-capabilities Enter the keyword system-capabilities to advertise the system capabilities
TLVs.
system-description Enter the keyword system-description to advertise the system description
TLVs.
system-name Enter the keyword system-name to advertise the system description TLVs.
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
Version
8.3.7.0
Introduced on the S-Series.
S6000
interface
Enter the following keywords and slot/port or number information:
• For a Fast Ethernet interface, enter the keyword
FastEthernet followed by the slot/
port information.
• For a 1-Gigabit Ethernet interface, enter the keyword
gigabitEthernet followed by
the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
tenGigabitEthernet followed
by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the
slot/port information.