Reference Guide

574 | Layer 2
www.dell.com | support.dell.com
name
z
Assign a name to the VLAN.
Syntax
name vlan-name
To remove the name from the VLAN, enter no name.
Parameters
Defaults
Not configured.
Command Modes
INTERFACE VLAN
Command
History
Usage
Information
To display information about a named VLAN, enter the show vlan command with the name parameter or the show
interfaces description command.
Related
Commands
show config
z
Display the current configuration of the selected VLAN.
Syntax
show config
Command Modes
INTERFACE VLAN
Example
Figure 24-2. show config Command Sample Output for a Selected VLAN
FTOS(conf-if-vl-100)#show config
!
interface Vlan 100
no ip address
no shutdown
FTOS(conf-if-vl-100)#
Command
History
show vlan
z
Display the current VLAN configurations on the switch.
Syntax
show vlan [brief | id vlan-id | name vlan-name]
S6000
vlan-name
Enter up to 32 characters as the name of the VLAN.
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
description Assign a descriptive text string to the interface.
interface vlan Configure a VLAN.
show vlan Display the current VLAN configurations on the switch.
S6000
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
S6000