Reference Guide

Layer 2 | 573
default vlan-id
z
Specify a VLAN as the Default VLAN.
Syntax
default vlan-id vlan-id
To remove the default VLAN status from a VLAN and VLAN 1 does not exist, use the no default vlan-id vlan-id
syntax.
Parameters
Defaults
The Default VLAN is VLAN 1
.
Command Modes
CONFIGURATION
Command
History
Usage
Information
To return VLAN 1 as the Default VLAN, use this command syntax (default-vlan-id 1).
The Default VLAN contains only untagged interfaces
.
Related
Commands
default-vlan disable
z
Disable the default VLAN so that all switchports are placed in the Null VLAN until they are explicitly configured
as a member of another VLAN
.
Defaults The default VLAN is enabled.
Command Modes
CONFIGURATION
Command
History
Usage
Information
no default vlan disable is not listed in the running-configuration, but when the default VLAN is disabled,
default-vlan disable is listed in the running-configuration.
S6000
vlan-id
Enter the VLAN ID number of the VLAN to become the new Default VLAN.
Range: 1 to 4094.
Default: 1
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
interface vlan Configure a VLAN.
S6000
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
Version
8.3.7.0
Introduced on the S4810.