Reference Guide

Layer 2 | 571
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 24-1. show mac-address-table aging-time Command Example
FTOS#show mac-address-table aging-time
Mac-address-table aging time : 1800
FTOS#
Related
Commands
show mac learning-limit
Z
Display MAC address learning limits set for various interfaces.
Syntax
show mac learning-limit [violate-action] [detail] [interface interface [vlan vlan-id]]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
show mac-address-table Display the current MAC address configuration.
violate-action (OPTIONALY) Enter the keyword violate-action to display the MAC
learning limit violation status.
detail (OPTIONAL) Enter the keyword detail to display the MAC learning limit
in detail.
interface interface (OPTIONAL) Enter the keyword interface with the following keywords
and slot/port or number information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
• For a Port Channel interface, enter the keyword
port-channel
followed by a Port Channel ID between 1 and 255.
vlan vlan-id Enter the keyword vlan followed by the VLAN ID.
Range: 1-4094
Version 9.0.0.0 Introduced on Z9000
Version 7.5.1.0
Added support for
violate-action and detail options
Version 6.5.1.0 Added support for Port Channel