Reference Guide

570 | Layer 2
www.dell.com | support.dell.com
Example (show
mac-address-tabl
e count)
FTOS# show mac-address-table count
MAC Entries for all vlans :
Dynamic Address Count : 110
Static Address (User-defined) Count : 0
Sticky Address Count : 0
Total Synced Mac from Peer(N): 100
Total MAC Addresses in Use: 110
FTOS#
Related
Commands
show mac-address-table aging-time
z
Display the aging times assigned to the MAC addresses on the switch.
Syntax
show mac-address-table aging-time [vlan vlan-id]
Parameters
Table 24-1. show mac-address-table Information
Column Heading Description
VlanId Displays the VLAN ID number.
Mac Address Displays the MAC address in nn:nn:nn:nn:nn:nn format.
Type Lists whether the MAC address was manually configured (Static) or learned
(Dynamic), or associated with a specific port (Sticky).
An (N) indicates that the specified MAC address has been learnt by a neighbor and is
synced to the node.
Interface Displays the interface type and slot/port information. The following abbreviations
describe the interface types:
• gi—Gigabit Ethernet followed by a slot/port.
• po—Port Channel followed by a number. Range: 1 to 255 for TeraScale
• te—10-Gigabit Ethernet followed by a slot/port.
State Lists if the MAC address is in use (Active) or not in use (Inactive).
Table 24-2. show mac-address-table count Information
Line Beginning with Description
MAC Entries... Displays the number of MAC entries learnt per VLAN.
Dynamic Address... Lists the number of dynamically learned MAC
addresses.
Static Address... Lists the number of user-defined MAC addresses.
Total MAC... Lists the total number of MAC addresses used by the
switch.
show mac-address-table aging-time Display MAC aging time.
S6000
vlan vlan-id Enter the keyword vlan followed by the VLAN ID to display the MAC
address aging time for MAC addresses on the VLAN.
Range: 1 to 4094.