Reference Guide

Layer 2 | 563
Command
History
Related
Commands
mac-address-table static
z
Associate specific MAC or hardware addresses to an interface and VLANs.
Syntax
mac-address-table static mac-address output interface vlan vlan-id
To remove a MAC address, use the no mac-address-table static mac-address output
interface vlan vlan-id command.
Parameters
Defaults
Not configured.
Command Modes
CONFIGURATION
Command
History
Related
Commands
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
mac learning-limit Set the MAC address learning limits for a selected interface.
show mac-address-table aging-time Display the MAC aging time.
S6000
mac-address
Enter the 48-bit hexidecimal address in nn:nn:nn:nn:nn:nn format.
output interface Enter the keyword output followed by one of the following interfaces:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
followed by the slot/port information.
vlan vlan-id Enter the keyword vlan followed by a VLAN ID.
Range:1 to 4094.
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
show mac-address-table Displays the MAC address table.