Reference Guide

Control and Monitoring | 55
Syntax
ftp-server topdir directory
To return to the default settings, enter no ftp-server topdir.
Parameters
Defaults
The internal flash is the default directory.
Command Modes
CONFIGURATION
Command
History
Usage
Information
After you enable FTP server functions with the ftp-server enable command, Dell Networking
recommends that you specify a top-level directory path. Without a top-level directory path specified,
the FTOS directs users to the flash directory when they log in to the FTP server.
ftp-server username
s z
Create a user name and associated password for incoming FTP server sessions.
Syntax
ftp-server username username password [encryption-type] password
To delete a user name and its password, use the no ftp-server username username
command.
Parameters
Defaults
Not enabled.
Command Modes
CONFIGURATION
Command
History
directory Enter the directory path.
Version 9.0.2.0 Introduced on S6000.
Version 8.3.11.1 Introduced on the Z9000.
Version 7.6.1.0 Introduced on S-Series.
S6000
username Enter a text string up to 40 characters long as the user name.
password password Enter the keyword password followed by a string up to 40 characters
long as the password.
Without specifying an encryption type, the password is unencrypted.
encryption-type (OPTIONAL) After the keyword password enter one of the following
numbers:
• 0 (zero) for an unecrypted (clear text) password
• 7 (seven) for hidden text password.
Version 9.0.2.0 Introduced on S6000.
Version 8.3.11.1 Introduced on the Z9000.
Version 7.6.1.0 Introduced on S-Series.