Reference Guide

| 549
Parameters
Defaults
As above
Command Modes
ROUTER ISIS (for IPv4)
CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Command
History
Usage
Information
How a metric value assigned to a redistributed route is advertised depends on how on the configuration
of the metric-style command. If the metric-style command is set for narrow mode and the metric value
in the redistribute ospf command is set to a number higher than 63, the metric value advertised in LSPs
will be 63. If the metric-style command is set for wide mode, an the metric value in the redistribute
ospf command is advertised.
router isis
Allows you to enable the IS-IS routing protocol and to specify an IP IS-IS process.
Syntax
router isis [tag]
To disable IS-IS routing, enter no router isis [tag].
process-id
Enter a number that corresponds to the OSPF process ID to be redistributed.
Range: 1 to 65355
metric metric-value
(OPTIONAL) The value used for the redistributed route. You should use a
metric value that is consistent with the destination protocol.
Range: 0 to 16777215
Default: 0.
metric-type {external |
internal}
(OPTIONAL) The external link type associated with the default route
advertised into a routing domain. The two options are:
• external
• internal
level-1
(OPTIONAL) Routes are independently redistributed into IS-IS as Level 1
routes.
level-1-2
(OPTIONAL) Routes are independently redistributed into IS-IS as Level-1-2
routes.
level-2
(OPTIONAL) Routes are independently redistributed into IS-IS as Level 2
routes.
This is the default.
match {external |
internal}
(OPTIONAL) The command used for OSPF to route and redistribute into
other routing domains. The values are
• internal
• external
route-map
map-name map-name is an identifier for a configured route map.
The route map should filter imported routes from the source routing protocol
to the current routing protocol.
If you do not specify a
map-name, all routes are redistributed. If you
specify a keyword, but fail to list route map tags, no routes will be imported.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.7.0
Introduced on the S4810.
S6000