Reference Guide

546 |
www.dell.com | support.dell.com
Command Modes
ROUTER ISIS
Usage
Information
Although the passive interface will neither send nor receive routing updates, the network on that
interface will still be included in IS-IS updates sent via other interfaces.
Command
History
redistribute
Redistribute routes from one routing domain to another routing domain.
Syntax
redistribute {static | connected | rip} [level-1 | level-1-2 | level-2] [metric metric-value]
[metric-type {external | internal}] [route-map map-name]
To end redistribution or disable any of the specified keywords, enter the
no redistribute {static | connected | rip} [metric metric-value] [metric-type {external |
internal}] [level-1 | level-1-2 | level-2] [route-map map-name] command.
Parameters
Defaults
metric metric-value = 0; metric-type= internal; level-2
Command Modes
ROUTER ISIS (for IPv4)
CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.7.0
Introduced on the S4810.
S6000
connected Enter the keyword connected redistribute active routes into IS-IS.
rip Enter the keyword rip to redistribute RIP routes into IS-IS.
static Enter the keyword static to redistribute user-configured routes into IS-IS.
metric metric-value
(OPTIONAL) Assign a value to the redistributed route.
Range: 0 to 16777215
Default: 0. You should use a value that is consistent with the destination
protocol.
metric-type {external |
internal}
(OPTIONAL) The external link type associated with the default route
advertised into a routing domain. You must specify one of the following:
• external
• internal
level-1
(OPTIONAL) Routes are independently redistributed into IS-IS as Level 1
routes.
level-1-2
(OPTIONAL) Routes are independently redistributed into IS-IS as Level-1-2
routes.
level-2
(OPTIONAL) Routes are independently redistributed into IS-IS as Level 2
routes.
This is the default.
route-map map-name
(OPTIONAL) If the route-map argument is not entered, all routes are
redistributed. If a
map-name value is not specified, then no routers are
imported.