Reference Guide

534 |
www.dell.com | support.dell.com
isis csnp-interval
Configure the IS-IS complete sequence number PDU (CSNP) interval on an interface.
Syntax
isis csnp-interval seconds [level-1 | level-2]
To return to the default values, enter the no isis csnp-interval [seconds] [level-1 | level-2]
command.
Parameters
Defaults
seconds = 10; level-1 (if not otherwise specified)
Command Modes
INTERFACE
Command
History
Usage
Information
The default values of this command are typically satisfactory transmission times for a specific interface
on a designated intermediate system. To maintain database synchronization, the designated routers
send CSNPs.
Level 1 and Level 2 CSNP intervals can be configured independently.
isis hello-interval
Specify the length of time between hello packets sent.
Syntax
isis hello-interval seconds [level-1 | level-2]
To return to the default values, enter the no isis hello-interval [seconds] [level-1 | level-2]
command.
Parameters
Defaults
seconds = 10; level-1 (if not otherwise specified)
S6000
seconds
Interval of transmission time between CSNPs on multi-access networks for the designated
intermediate system.
Range: 0 to 65535
Default: 10
level-1
(OPTIONAL) Independently configures the interval of time between transmission of CSNPs
for Level 1.
level-2
(OPTIONAL) Independently configures the interval of time between transmission of CSNPs
for Level 2.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.7.0
Introduced on the S4810.
S6000
seconds
Allows you to set the length of time between hello packet transmissions.
Range: 1 to 65535
Default: 10
level-1
(OPTIONAL) Select this value to configure the hello interval for Level 1.
This is the default.
level-2
(OPTIONAL) Select this value to configure the hello interval for Level 2.