Reference Guide

526 |
www.dell.com | support.dell.com
Defaults
Not configured.
Command Modes
ROUTER ISIS (for IPv4)
CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Command
History
Usage
Information
You can assign a name to a routing process so a prefix list will be applied to only the routes derived
from the specified routing process.
Related
Commands
distribute-list redistributed-override
Supress flapping of routes when the same route is redistributed into IS-IS from multiple routers in the
network.
Syntax
distribute-list redistributed-override in
To return to the default, use the no distribute-list redistributed-override in command.
Defaults
No default behavior or values
Command Modes
ROUTER ISIS (for IPv4)
CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Command
History
Usage
Information
When the command is executed, IS-IS will not download the route to the routing table if the same route
was redistributed into IS-IS routing protocol on the same router.
domain-password
Set the authentication password for a routing domain.
Syntax
domain-password [hmac-md5 | encryption-type ] password
To disable the password, enter no domain-password.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.7.0
Introduced on the S4810.
distribute-list in Filters networks received in updates.
redistribute Redistributes routes from one routing domain to another routing domain.
S6000
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.7.0
Introduced on the S4810.
Version 9.0.2.0 Introduced IPv6 ISIS support
S6000