Reference Guide

| 525
distribute-list in
Filter network prefixes received in updates.
Syntax
distribute-list prefix-list-name in [interface]
To return to the default values, enter the no distribute-list prefix-list-name in [interface] command.
Parameters
Defaults
Not configured.
Command Modes
ROUTER ISIS (for IPv6)
CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Command
History
Related
Commands
distribute-list out
Suppress network prefixes from being advertised in outbound updates.
Syntax
distribute-list prefix-list-name out [connected | bgp as number | ospf process-id | rip | static]
To return to the default values, enter the no distribute-list prefix-list-name out [bgp as number
connected | ospf process-id | rip | static] command.
Parameters
S6000
prefix-list-name
Specify the prefix list to filter prefixes in routing updates.
interface
(OPTIONAL) Identifies the interface type slot/port as one of the following:
• For a1- Gigabit Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/port information.
• For a Port Channel interface, enter
port-channel followed by a number from
1 to 32 for EtherScale, 1 to 255 for TeraScale.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
followed by the slot/port information.
• For a VLAN, enter the keyword
vlan followed by a number from 1 to 4094.
Version 9.0.2.0 Introduced on S6000.
Version
8.3.7.0
Introduced on the S4810.
distribute-list out Suppress networks from being advertised in updates.
redistribute Redistributes routes from one routing domain to another routing domain.
S6000
prefix-list-name
Specify the prefix list to filter prefixes in routing updates.
connected (OPTIONAL) Enter the keyword connected for directly connected routing
process.
ospf process-id
(OPTIONAL) Enter the keyword ospf followed by the OSPF process-ID number.
Range: 1 to 65535
bgp as number
(OPTIONAL) Enter the BGP followed by the AS Number.
Range: 1 to 65535
rip (OPTIONAL) Enter the keyword rip for RIP routes.
static (OPTIONAL) Enter the keyword static for user-configured routing process.