Reference Guide

| 521
Parameters
Command Modes
EXEC privilege
Command
History
debug isis local-updates
Enables debugging on a specific interface and provides diagnostic information to debug IS-IS local
update packets.
Syntax
debug isis local-updates [interface]
To turn off debugging, enter the no debug isis local-updates [interface] command.
Parameters
Command Modes
EXEC privilege
Command
History
debug isis snp-packets
Enable debugging on a specific interface and provides diagnostic information to debug IS-IS complete
sequence number PDU (CSNP) and partial sequence number PDU (PSNP) packets.
Syntax
debug isis snp-packets [interface]
To turn off debugging, enter the no debug isis snp-packets [interface] command.
interface
(OPTIONAL) Identifies the interface type slot/port as one of the following:
• For a Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by
the slot/port information.
• For a Port Channel, enter the keyword
port-channel followed by a number from 1
to 32 for EtherScale, 1 to 255 for TeraScale.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
followed by the slot/port information.
• For a VLAN, enter the keyword
vlan followed by a number from 1 to 4094.
Version 9.0.2.0 Introduced on S6000.
Version
8.3.7.0
Introduced on the S4810.
S6000
interface
(OPTIONAL) Identifies the interface type slot/port as one of the following:
• For a Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by
the slot/port information.
• For a Port Channel, enter the keyword
port-channel followed by a number from 1
to 32 for EtherScale, 1 to 255 for TeraScale.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
followed by the slot/port information.
• For a VLAN, enter the keyword
vlan followed by a number from 1 to 4094.
Version 9.0.2.0 Introduced on S6000.
Version
8.3.7.0
Introduced on the S4810.
S6000