Reference Guide

498 | IPv4 Routing
www.dell.com | support.dell.com
Command Modes
EXEC
EXEC Privilege
Command History
Example
Figure 21-14. show ip management route Command Example
FTOS#show ip management-route
Destination Gateway State
----------- ------- -----
10.1.2.0/24 ManagementEthernet 0/0 Connected
172.16.1.0/24 10.1.2.4 Active
FTOS#
show ipv6 management-route
s Z
Display the IPv6 static routes configured for the management interface.
Syntax
show ipv6 management-route [all | connected | summary | static]
Parameters
Command Modes
EXEC Privilege
Command
History
Example
FTOS#show ipv6 management-route
IPv6 Destination Gateway State
---------------- ------- -----
2001:34::0/64 ManagementEthernet 0/0 Connected
2001:68::0/64 2001:34::16 Active
FTOS#
show ip protocols
Z
View information on all routing protocols enabled and active on the switch.
Syntax
show ip protocols
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on the Z9000.
S6000
all
Enter the keyword all to view all IPv6 addresses assigned to all
Management interfaces on the switch.
connected
Enter the keyword connected to view only routes directly connected to
the Management interface.
summary
Enter the keyword summary to view a table listing the number of active
and non-active routes and their sources.
static
Enter the keyword static to view non-active routes also.
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
Version
8.3.7.0
Introduced on the S4810.
S6000