Reference Guide

IPv4 Routing | 491
Related
Commands
show arp retries
z
Display the configured number of ARP retries.
Syntax
show arp retries
Command Modes
EXEC
EXEC Privilege
Command History
Related
Commands
show hosts
z
View the host table and DNS configuration.
Syntax
show hosts
Command Modes
EXEC
EXEC Privilege
Command History
Example
Figure 21-9. show hosts Command Example
FTOS#show hosts
Default domain is not set
Name/address lookup uses static mappings
Table 21-3. show arp summary Command Example Fields
Row Heading Description
Total Entries Lists the total number of ARP entries in the ARP table.
Static Entries Lists the total number of configured or static ARP entries.
Dynamic Entries Lists the total number of learned or dynamic ARP entries.
CPU Lists which CPU the entries are stored on.
ip local-proxy-arp Enable/disable Layer 3 communication in secondary VLANs.
switchport mode
private-vlan
Set the PVLAN mode of the selected port.
S6000
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
arp retries Set the number of ARP retries in case the system does not receive an ARP reply
in response to an ARP request.
S6000
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
Version 9.0.0.0 Added support for IPv6 addresses