Reference Guide

48 | Control and Monitoring
www.dell.com | support.dell.com
clear line
s z
Reset a terminal line.
Syntax
clear line {line-number | aux 0 | console 0 | vty number}
Parameters
Command Modes
EXEC Privilege
Command
History
configure
s z
Enter the CONFIGURATION mode from the EXEC Privilege mode.
Syntax
configure [terminal]
Parameters
Command Modes
EXEC Privilege
Command
History
Example
FTOS#configure
FTOS(conf)#
debug cpu-traffic-stats
s z
Enable the collection of CPU traffic statistics.
Syntax
debug cpu-traffic-stats
To disable the debugging, execute the no debug cpu-traffic-stats command.
S6000
line-number Enter a number for one of the 12 terminal lines on the system.
Range: 0 to 11.
aux 0 Enter the keywords aux 0 to reset the Auxiliary port.
console 0 Enter the keyword console 0 to reset the Console port.
vty number Enter the keyword vty followed by a number to clear the virutal Terminal
line.
Range: 0 to 9
Version 9.0.2.0 Introduced on the S6000.
Version 9.0.0.0 Introduced on Z9000
Version 7.8.1.0 Introduced support on S-Series
S6000
terminal (OPTIONAL) Enter the keyword terminal to specify that you are configuring
from the terminal.
Version 9.0.2.0 Introduced on the S6000.
Version 9.0.0.0 Introduced on Z9000
Version 7.8.1.0 Introduced support on S-Series
S6000