Reference Guide

472 | IPv4 Routing
www.dell.com | support.dell.com
Parameters
Command Modes
EXEC Privilege
Command History
clear ip fib stack-unit
z
Clear all Forwarding Information Base (fib) entries in the specified stack unit (use this command with
caution, see Usage Information below)
Syntax
clear ip fib stack-unit unit-number
Parameters
Command Mode
EXEC
Command History
Usage Information
Use this command to clear Layer 3 CAM inconsistencies.
Related
Commands
clear ip route
z
Clear one or all routes in the routing table.
Syntax
clear ip route {* | ip-address mask | vrf vrf instance}
Parameters
Command Modes
EXEC Privilege
Command History
name
Enter the name of the host to delete.
Enter * to delete all host table entries.
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
S6000
unit-number
Enter the number of the stack unit.
Range: 0-7
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000
Caution: Executing this command will cause traffic disruption.
show ip fib stack-unit
Show FIB entries on a specified stack-unit.
S6000
* Enter an asterisk (*) to clear all learned IP routes.
ip-address mask
Enter a specific IP address and mask in dotted decimal format to clear
that IP address from the routing table.
vrf instance
(Optional) Clear only the routes tied to the VRF instance.
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on Z9000