Reference Guide

Control and Monitoring | 47
Command
History
Usage
Information
A MOTD banner message is displayed only in EXEC Privilege mode after entering the
enable command followed by the password. These banners are not displayed to users in
EXEC (non-privilege) mode.
Related
Commands
Enables periodic audits of software and hardware copies of the IPv4 forwarding table.
clear alarms
s z
Clear alarms on the system.
Syntax
clear alarms
Command Modes
EXEC Privilege
Command
History
Usage
Information
This command clear alarms that are no longer active. If an alarm situation is still active, it is
seen in the system output.
clear command history
s z
Clear the command history log.
Syntax
clear command history
Command Modes
EXEC Privilege
Command
History
Related
Commands
Version 9.0.2.0 Introduced on the S6000.
Version 9.0.0.0 Introduced on Z9000.
Version 7.8.1.0 Introduced support on S-Series.
banner exec Sets a banner to be displayed when you enter the EXEC Privilege mode.
banner login Sets a banner to be displayed after successful login to the system.
S6000
Version 9.0.2.0 Introduced on the S6000.
Version 9.0.0.0 Introduced on Z9000.
Version 7.8.1.0 Introduced support on S-Series.
S6000
Version 9.0.2.0 Introduced on the S6000.
Version 9.0.0.0 Introduced on Z9000.
Version 7.8.1.0 Introduced support on S-Series.
show command-
history
Display a buffered log of all commands entered by all users along with a
time stamp.