Reference Guide

454 | Interfaces
www.dell.com | support.dell.com
RS state This is the reserved digital state of the pin AS(1) per SFF-8079 and RS(1) per
SFF-8431.
Tx Disable state If the admin status of the port is down then this flag will be set to true.
Temperature High Alarm Flag This can be either true/False and it depends on the Current Temperature value
displayed above.
Voltage High Alarm Flag This can be either true or false, depending on the Current voltage value
displayed above.
Tx Bias High Alarm Flag This can be either true or false, depending on the present Tx bias current value
displayed above.
Tx Power High Alarm Flag This can be either true or false, depending on the Current Tx power value
displayed above.
Rx Power High Alarm Flag This can be either true or false, depending on the Current Rx power value
displayed above.
Temperature Low Alarm Flag This can be either true or false, depending on the Current Temperature value
displayed above.
Voltage Low Alarm Flag This can be either true or false, depending on the Current voltage value
displayed above.
Tx Bias Low Alarm Flag This can be either true or false, depending on the Tx bias current value
displayed above.
Tx Power Low Alarm Flag This can be either true or false, depending on the Current Tx power value
displayed above.
Rx Power Low Alarm Flag This can be either true or false, depending on the Current Rx power value
displayed above.
Temperature High Warning
Flag
This can be either true or false, depending on the Current Temperature value
displayed above.
Voltage High Warning Flag This can be either true or false, depending on the Current voltage value
displayed above.
Tx Bias High Warning Flag This can be either true or false, depending on the Tx bias current value
displayed above.
Tx Power High Warning Flag This can be either true or false, depending on the Current Tx power value
displayed above.
Rx Power High Warning Flag This can be either true or false, depending on the Current Tx power value
displayed above.
Temperature Low Warning
Flag
This can be either true or false, depending on the Current Temperature value
displayed above.
Voltage Low Warning Flag This can be either true or false, depending on the Current voltage value
displayed above.
Tx Bias Low Warning Flag This can be either true or false, depending on the present Tx bias current value
displayed above.
Tx Power Low Warning Flag This can be either true or false, depending on the Current Tx power value
displayed above.
Rx Power Low Warning Flag This can be either true or false, depending on the Current Rx power value
displayed above.
Table 20-9. Diagnostic Data in show interfaces transceiver (continued)
Line Description