Reference Guide

Control and Monitoring | 45
Press RETURN to get started.
4d21h6m: %RPM0-P:CP %SEC-5-LOGIN_SUCCESS: Login successful for user online
console
This is the banner
FTOS>
Related
Commands
banner login
s z
Set a banner to be displayed when logging on to the system.
Syntax
banner login {keyboard-interactive | no keyboard-interactive} [c line c]
Enter no banner login to delete the banner text.
Enter no banner login keyboard-interactive to automatically go to the banner message
prompt (does not require a carriage return).
Parameters
Defaults
No banner is configured and the CR is required when creating a banner.
Command Modes
CONFIGURATION
Command
History
banner login Sets a banner for login connections to the system.
banner motd Sets a Message of the Day banner.
exec-banner Enable the display of a text string when the user enters the EXEC mode.
line Enable and configure console and virtual terminal lines to the system.
S6000
keyboard-interactive Enter this keyword to require a carriage return (CR) to get the message
banner prompt.
c Enter a delineator character to specify the limits of the text banner. In the
Example, the % character is the delineator character.
line Enter a text string for your text banner message ending the message with
your delineator.
In the Example, the delineator is a percent character (%).
Ranges:
• maximum of 50 lines
• up to 255 characters per line
Version 9.0.2.0 Introduced on the S6000.
Version 9.0.0.0 Introduced on Z9000.
Version 7.8.1.0 Introduced support on S-Series
Version 9.0.2.0 Introduced keyboard-interactive keyword