Reference Guide

Interfaces | 449
Port Description Status Speed Duplex Vlan
Gi 0/0 Up 1000 Mbit Auto --
Gi 0/1 Down Auto Auto 1
Gi 0/2 Down Auto Auto 1
Gi 0/3 Down Auto Auto --
Gi 0/4 FTOSPort Up 1000 Mbit Auto 30-130
Gi 0/5 Down Auto Auto --
Gi 0/6 Down Auto Auto --
Gi 0/7 Up 1000 Mbit Auto 1502,1504,1506-1508,1602
Gi 0/8 Down Auto Auto --
Gi 0/9 Down Auto Auto --
Gi 0/10 Down Auto Auto --
Gi 0/11 Down Auto Auto --
Gi 0/12 Down Auto Auto --
Gi 0/13 Down Auto Auto --
Gi 0/14 Down Auto Auto --
Gi 0/15 Down Auto Auto --
FTOS#
Related
Commands
show interfaces switchport
s z
Display only virtual and physical interfaces in Layer 2 mode. This command displays the Layer 2
mode interfaces’ IEEE 802.1Q tag status and VLAN membership.
Syntax
show interfaces switchport [interface [stack-unit slot-number] | stack-unit unit-id ]
Parameters
Command Modes
EXEC
EXEC Privilege
show interfaces Display information on a specific physical interface or virtual interface.
S6000
interface
Enter one of the following keywords and slot/port or number information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by
the slot/port information.
• For a port channel interface, enter the keyword
port-channel followed by a number:
S-Series Range: 1-128
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet
followed by the slot/port information.
• Enter the keyword
backup to view the backup interface for this interface.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the slot/
port information.
stack-unit
slot-number
(OPTIONAL) Enter the keyword stack-unit followed by the slot number.
Range:
S4810: 0-11
S6000: 0-5
stack-unit
unit-id
(OPTIONAL) Enter the keyword stack-unit followed by the stack member number. This
option is available only on S-Series.
Unit ID range:
S4810: 0-11
Z9000: 0-7
S6000: 0-5