Reference Guide

Interfaces | 417
Command History
Example
Figure 20-1. clear counters Command Example
FTOS#clear counters
Clear counters on all interfaces [confirm]
Related
Commands
clear dampening
s z
Clear the dampening counters on all the interfaces or just the specified interface.
Syntax
clear dampening [interface]
Parameters
Defaults
Without a specific interface specified, the command clears all interface dampening counters
Command Modes
EXEC Privilege
Command History
Example
FTOS#clear dampening gigabitethernet 1/2
Clear dampening counters on Gi 1/2 [confirm] y
FTOS#
Related
Commands
Version 9.0.2.0 Introduced on then S6000.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.2.1.0 Introduced on the S-Series
Version 6.5.1.0 Updated definition of the learning-limit option for clarity.
mac learning-limit Allow aging of MACs even though a learning-limit is configured or disallow
station move on learnt MACs.
show interfaces Displays information on the interfaces.
S6000
interface
(Optional) Enter one of the following keywords and slot/port or number
information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/port information.
• For a port channel interface, enter the keyword
port-channel followed
by a number:
Range: 1-128
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
followed by the slot/port information.
Version 9.0.2.0 Introduced on then S6000.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.2.1.0 Introduced on the S4810
show interfaces dampening
Display interface dampening information.
dampening Configure dampening on an interface.