Reference Guide

406 | Internet Group Management Protocol (IGMP)
www.dell.com | support.dell.com
ip igmp version
z
Manually set the version of the router to IGMPv2 or IGMPv3.
Syntax
ip igmp version {2 | 3}
Parameters
Defaults
2 (that is IGMPv2)
Command Modes
INTERFACE
Command
History
show ip igmp groups
z
View the IGMP groups.
Syntax
show ip igmp groups [group-address [detail] | detail | interface [group-address [detail]]]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
S6000
2 Enter the number 2 to set the IGMP version number to IGMPv2.
3 Enter the number 3 to set the IGMP version number to IGMPv3.
Version 9.0.2.0 Introduced on then S6000.
Version 8.3.11.1 Introduced on the Z9000.
S6000
group-address
(OPTIONAL) Enter the group address in dotted decimal format to view information
on that group only.
interface
(OPTIONAL) Enter the interface type and slot/port information:
• For a 100/1000 Ethernet interface, enter the keyword
gigabitethernet followed
by the slot/port information.
• For a 1-Gigabit Ethernet interface, enter the keyword
gigabitethernet followed
by the slot/port information.
• For a port-channel interface, enter the keyword
port-channel followed by the
port-channel number.
• For a Loopback interface, enter the keyword
loopback followed by a number
from 0 to 16383.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet
followed by the slot/port information.
• For a VLAN interface enter the keyword
vlan followed by a number from 1 to
4094.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the
slot/port information.
detail (OPTIONAL) Enter the keyword detail to display the IGMPv3 source information.
Version 9.0.2.0 Introduced on then S6000.
Version 8.3.11.1 Introduced on the Z9000.