Reference Guide

Internet Group Management Protocol (IGMP) | 403
Parameters
Defaults
1000 milliseconds
Command Modes
INTERFACE
Command
History
ip igmp querier-timeout
z
Change the interval that must pass before a multicast router decides that there is no longer another
multicast router that should be the querier.
Syntax
ip igmp querier-timeout seconds
To return to the default value, enter no ip igmp querier-timeout.
Parameters
Defaults
125 seconds
Command Modes
INTERFACE
Command
History
ip igmp query-interval
z
Change the transmission frequency of IGMP general queries sent by the Querier.
Syntax
ip igmp query-interval seconds
To return to the default values, enter no ip igmp query-interval.
Parameters
Defaults
60 seconds
Command Modes
INTERFACE
milliseconds
Enter the number of milliseconds as the interval.
Default: 1000 milliseconds
Range: 100 to 65535
Version 9.0.2.0 Introduced on then S6000.
Version 8.3.11.1 Introduced on the Z9000.
S6000
seconds
Enter the number of seconds the router must wait to become the new querier.
Default: 125 seconds
Range: 60 to 300
Version 9.0.2.0 Introduced on then S6000.
Version 8.3.11.1 Introduced on the Z9000.
S6000
seconds
Enter the number of seconds between queries sent out.
Default: 60 seconds
Range: 1 to 18000