Reference Guide

GARP VLAN Registration (GVRP) | 397
show gvrp statistics
s z
Display the GVRP configuration statistics.
Syntax
show gvrp statistics {interface interface | summary}
Parameters
Defaults
No default values or behavior
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 18-3. show gvrp statistics Command Example
FTOS#show gvrp statistics int gi 1/0
Join Empty Received: 0
Join In Received: 0
Empty Received: 0
LeaveIn Received: 0
Leave Empty Received: 0
Leave All Received: 40
Join Empty Transmitted: 156
Join In Transmitted: 0
Empty Transmitted: 0
Leave In Transmitted: 0
Leave Empty Transmitted: 0
Leave All Transmitted: 41
Invalid Messages/Attributes skipped: 0
Failed Registrations: 0
FTOS#
Usage
Information
Invalid messages/attributes skipped can occur in the following cases:
• The incoming GVRP PDU has an incorrect length.
• “End of PDU” was reached before the complete attribute could be parsed.
• The Attribute Type of the attribute that was being parsed was not the GVRP VID Attribute Type
(0x01).
• The attribute that was being parsed had an invalid attribute length.
S6000
interface interface Enter the keyword interface followed by one of the interface keywords and
slot/port or number information:
• For a Fast Ethernet interface, enter the keyword
FastEthernet followed by
the slot/port information.
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/port information.
• For a Port Channel interface, enter the keyword
port-channel followed by
the Port Channel number:
S-Series Range: 1-128
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
summary Enter the keyword summary to display just a summary of the GVRP statistics.
Version 9.0.2.0 Introduced on then S6000.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.2.1.0 Introduced on the S-Series