Reference Guide

File Management | 39
upgrade boot
s
Upgrade the bootflash image or bootselector image.
Syntax
upgrade boot {all | bootflash-image | bootselector-image} stack-unit {0-5 | all} {booted | flash: |ftp: |
tftp: | usbflash:} (A: | B:}
Parameters
Table 3-2. show version Command Fields
Lines beginning with Description
Dell Network... Name of the operating system
Dell Operating... OS version number
Dell Application... Software version
Copyright (c)... Copyright information
Build Time... Software build’s date stamp
Build Path... Location of the software build files loaded on the system
Dell uptime is... Amount of time the system has been up
System image... Image file name
System Type: S6000
Control Processor:... Control processor information and amount of memory on processor.
16G bytes... Boot flash memory on system.
S6000
all
Enter this keyword to change both the bootflash and bootselector images.
bootflash-image
Enter this keyword to change the bootflash image.
bootselector-image
Enter this keyword to change the bootselector image
0-5
Enter this keyword to upgrade only the mentioned stack-unit
all
Enter this keyword to upgrade all the member stack-units
booted
Enter this keyword to upgrade from the current image in the S6000
ftp
After entering this keyword you can either follow it with the location of the
source file in this form: //userid:password@hostip/filepath, or press
Enter to launch a prompt sequence.
tftp
After entering this keyword you can either follow it with the location of the
source file in this form: //hostlocation/filepath, or press Enter to launch a
prompt sequence.
flash
After entering this keyword you can either follow it with the location of the
source file in this form://filepath, or press Enter to launch a prompt
sequence.
usbflash
After entering this keyword you can either follow it with the location of the
source file in this form://filepath, or press Enter to launch a prompt
sequence..