Reference Guide

384 | Force10 Resilient Ring Protocol (FRRP)
www.dell.com | support.dell.com
disable
s z
Disable the Resilient Ring Protocol.
Syntax
disable
To enable the Resilient Ring Protocol, use the no disable command.
Defaults
Disabled
Command Modes
CONFIGURATION (conf-frrp)
Command
History
interface
s z
Configure the primary, secondary, and control-vlan interfaces.
Syntax
interface {primary interface secondary interface control-vlan vlan-id}
To return to the default, use the no interface {primary interface secondary interface
control-vlan vlan-id} command.
Parameters
S6000
Version 9.0.2.0 Introduced on then S6000.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.2.1.0 Introduced on the S-Series
S6000
primary interface
Enter the keyword primary to configure the primary interface followed by one of
the following interfaces and slot/port information:
• For a Fast Ethernet interface, enter the keyword
FastEthernet followed by
the slot/port information.
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/port information.
• For Port Channel interface types, enter the keyword
port-channel followed
by a number from 1 to 255.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by
the slot/port information.
secondary
interface
Enter the keyword secondary to configure the secondary interface followed by
one of the following interfaces and slot/port information:
• For a Fast Ethernet interface, enter the keyword
FastEthernet followed by
the slot/port information.
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/port information.
• For Port Channel interface types, enter the keyword
port-channel followed
by a number from 1 to 255.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by
the slot/port information.
control-vlan
vlan-id
Enter the keyword control-vlan followed by the VLAN ID.
Range: 1 to 4094