Reference Guide

Equal Cost Multi-Path | 379
Command
History
Usage
Information
The switch must be restarted after this command is used.
link-bundle-monitor enable
z
Provides a mechanism to enable monitoring of traffic distribution on an ECMP link
bundle.
Syntax link-bundle-monitor enable
To exit from ecmp group mode, use the exit command.
Command Modes
ECMP-GROUP
PORT-CHANNEL INTERFACE
Command
History
link-bundle-distribution trigger-threshold
z
Provides a mechanism to set the threshold to trigger when traffic distribution will
begin being monitored on an ECMP link bundle.
Syntax
link-bundle-distribution trigger-threshold
[percent]
To exit from ecmp group mode, use the
exit command.
Parameters
Command Modes
EXEC Privilege
Command
History
Version 9.0.2.0 Introduced on then S6000.
Version 8.3.11.1 Introduced on the Z9000.
S6000
Version 9.0.2.0 Introduced on then S6000.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.2.1.0 Introduced on the S4810.
S6000
percent
Indicate the threshold value when traffic distribution will start being
monitored on an ECMP link bundle.
Range: 1 to 90%
Default: 60%
Version 9.0.2.0 Introduced on then S6000.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.2.1.0 Introduced on the S-Series