Reference Guide

Dynamic Host Configuration Protocol (DHCP) | 363
Command Mode
DHCP <POOL>
Default
None
Command History
pool
s z
Create an address pool
Syntax
pool name
Parameters
Command Mode
DHCP
Default
None
Command History
show ip dhcp binding
s z
Display the DHCP binding table.
Syntax
show ip dhcp binding
Command Mode
EXEC Privilege
Default
None
Command History
show ip dhcp configuration
s z
Display the DHCP configuration.
Syntax
show ip dhcp configuration [global | pool name]
Version 9.0.2.0 Introduced on then S6000.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.2.1.0 Introduced on the S-Series
S6000
name
Enter the address pool’s identifying name
Version 9.0.2.0 Introduced on then S6000.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.2.1.0 Introduced on the S-Series
S6000
Version 9.0.2.0 Introduced on then S6000.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.2.1.0 Introduced on the S-Series
S6000