Reference Guide

36 | File Management
www.dell.com | support.dell.com
Command Modes
EXEC Privilege
Command
History
Example (partial)
FTOS#show running-config
Current Configuration ...
! Version 9-0(2-0)
! Last configuration change at Thu Apr 18 10:18:39 2013 by admin
! Startup-config last updated at Thu Apr 18 10:18:40 2013 by admin
!boot system stack-unit 0 primary system: A:
boot system stack-unit 0 secondary tftp://10.16.127.35/FTOS-SI-9-0-2-0.bin
boot system stack-unit 0 default system: A:
boot system gateway 10.16.132.254
!redundancy auto-synchronize full
redundancy disable-auto-reboot stack-unit
!
redundancy disable-auto-reboot stack-unit 0
redundancy disable-auto-reboot stack-unit 1
redundancy disable-auto-reboot stack-unit 2
redundancy disable-auto-reboot stack-unit 3
redundancy disable-auto-reboot stack-unit 4
redundancy disable-auto-reboot stack-unit 5
!
hardware watchdog stack-unit 0
hardware watchdog stack-unit 1
Example (show
running-config)
FTOS#show running-config status
running-config bytes 10257, checksum 0xFD33339F
startup-config bytes 10257, checksum 0xFD33339F
Usage
Information
The status option enables you to display the size and checksum of the running configuration and the
startup configuration.
• snmp for the current SNMP configuration
•
spanning-tree for the current spanning tree configuration
•
static for the current static route configuration
•
tacacs+ for the current TACACS+ configuration
•
tftp for the current TFTP configuration
•
trace-group for the current trace-group configuration
•
trace-list for the current trace-list configuration
•
users for the current users configuration
•
wred-profile for the current wred-profile configuration
configured
(OPTIONAL) Enter the keyword configuration to display stack-unit
interfaces with non-default configurations only.
status (OPTIONAL) Enter the keyword status to display the checksum for the
running configuration and the start-up configuration.
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on the Z9000.
Version 7.8.1.0 Introduced support on S-Series
Version 7.4.1.0 Expanded to include last configuration change and start-up last updated (date and time)
and who made the change
Version 6.5.4.0 Added status option